Posted by Jeff nwoh on March 18, 2014 at 19:24:50 from (24.95.32.85):
Bought a Mustang 940 skid steer around the first of the year. It's the same model I already have. My original needs all the chains and sprockets in the drives replaced. Approx $3000 worth of parts from the dealer and a lot of labor. I decided it wasn't worth the money on a machine with 10000 hours or so.
The "new" one has an engine that sat with water in the cylinders, and a pretty mangled up boom and roll cage. The chassis is actually pretty decent other than the paint. It has had some idlers, chains, and sprockets replaced. Still has a few original sprockets and some bearings that need some attention.
Plan is to work through the drives and chassis on this new one. When my old one finally gives up the ghost, I'll swap my engine, boom, and cage onto the new one.
Long story short.....These sprockets are the ones that attach to the axles. Around $250 each at dealer. Bought a couple sprocket blanks off ebay for $30 each. Cut the welds between hub and sprocket on the lathe, opened up the id on the new sprockets, and then welded them on.
So, instead of $500 in 2 sprockets, I have $60 and a few hours messing around. Now to figure out how to save that kind money on the chains.......
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Diagnosing Engine Difficulty - Diesel Tractors - by Staff. The following suggestions are listed for your assistance. You can make simple adjustments on your tractor that will improve its operation and save you the time and expense of hiring someone to do it for you. Always make one adjustment at a time, and if the adjustment made does not improve the condition, return to the original setting before proceeding to the next adjustment. Hard Starting Cold air temperatures. Insufficient fuel.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.