Farmall & IHC Tractors Discussion Board |
Re: 706 trans cover plate
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by the tractor vet on August 02, 2006 at 07:43:44 from (75.24.34.189):
In Reply to: 706 trans cover plate posted by jim mc dade on August 02, 2006 at 05:23:54:
Put in what ever suits ya but make sure that your in (N) when going back together . Now one thing that ya need to know is does this one have the spring loaded parklock or is it just the over center one . If it is the spring loaded one then you must block the park pawl in the UNLOCK posision , myself i use a 1/2 Nut to block it up . If it is and over center one then just hold it in the unlock. As you come up the rev shifter rod will come out of the rev shift fork catch the woodwrof key and shifting fork . Now is when ya look EVERYTHING OVER real good and fix replace what ever is loose broken or wore out . Pay close attenshion to the cover as to how sloppy the hole for the shifter is there should be NO slop , now you can buy a new rebuilt cover or have a good machine shop bore out the hole and pres in a bushing BUT THE ORG. center MUST BE MAINTAINED. Look over the shifter cam for excess ware and the detent plate for ware.
Replies:
Home
| Forums
Today's Featured Article -
Diagnosing Engine Difficulty - Diesel Tractors - by Staff. The following suggestions are listed for your assistance. You can make simple adjustments on your tractor that will improve its operation and save you the time and expense of hiring someone to do it for you. Always make one adjustment at a time, and if the adjustment made does not improve the condition, return to the original setting before proceeding to the next adjustment. Hard Starting Cold air temperatures. Insufficient fuel.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|