Got some things hung up in the shop

Alan K · Dec 3, 2019

Finally got a couple of framed ads up in the shop to go with my other one. The tin sign was given to me by a good friend of mine. Brian(MN)

Ill John · Dec 4, 2019

Looks great

Sodak farmer · Dec 4, 2019

Looks great Alan. I have the same liner in my shop and am quite hesitant to put any holes in it to hang anything. What did u do? Have used magnets with limited success. Loren.

Alan K · Dec 4, 2019

Ive used magnets with hooks for some things which works ok. I used small screws on the metal sign and small "L" shaped hooks for the pictures. I know what you mean about making holes. When I put up my light over the bench there was a lot of extra framing around the window and I didnt have a clear idea where the "studs" would be so I went through my pictures that I had when the building was being built and did some measurements based on the picture. I didnt miss the studs. I figure if you are going in the same place as the studs you can always just put an extra screw there and it wont be out of place.

J.Wondergem · Dec 4, 2019

(quoted from post at 10:52:32 12/04/19) Looks great Alan. I have the same liner in my shop and am quite hesitant to put any holes in it to hang anything. What did u do? Have used magnets with limited success. Loren.

I hung all my stuff up on mine on the screws that hold the sheet metal on. Some of the heavy stuff I ran hooks in the holes where the screws were.

Got some things hung up in the shop

Alan K

Well-known Member

Ill John

Member

Sodak farmer

Member

Alan K

Well-known Member

J.Wondergem

Well-known Member

Similar threads