radiator steel pipe to engine block replacement

glvu

Member
28501.jpg
28503.jpg

Can seem to buy the orginal pipe so make a fix.

this fix is for mm445

Material list from lowes or homedepot.

one 1 1/4in, copper 45 degree elbow. (pic)
one 1 1/4 to 1in copper reducer, cut the 1in side to reduce contact with engine block(pic)
one 1 1/4 inch copper pipe about 6 inches
one 1 1/4 inch cap, cut a section about a ring width and solder to make washer.
one soldering torch and solder
AND most important one JB Water Weld to stop seal the leaks.
 
I had 1 3/8" tubing mandrel bent for those. I had about 30 made. I did it for my Jetstar. I think new ones from agco are close to $400.
 
(quoted from post at 19:19:09 10/01/15) I had 1 3/8" tubing mandrel bent for those. I had about 30 made. I did it for my Jetstar. I think new ones from agco are close to $400.

Wow $400!. ebay the rest of those 30's.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top