135 hyd vavle

Bret4207

Well-known Member
What type of valve do i have here on my 135 and how is it supposed to work my remote/s? Near as I can tell it depends on one of the 3pt levers running it, but I can't get it to hold position. It's not in my manual either. Thanks!
mvphoto92170.jpg
 
That's a divertor valve for sending oil to a separate spool valve. When using it
the position lever should be in constant pumping for the spool valve to work.
 

Okay, so I'm short a valve in the system? Any manuals out there that show how the whole shebang is supposed to be set up?
 
I expect not, you may want to get the actual MF control valve set up and then you can get the MF operation manual. The valve you have appears to have a return connection for an open center valve system. Remember I said appears. I expect that the system may have supplied oil to a separate valve system for a loader that went with the loader. In an open center system oil would flow out of the connection on your valve through the remote valve and back to the sump through the return. Operating remote cylinders would be connected to ports on the remote valve.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top