MF40 Steer Pump Seals and Remote Reservior

burgs

Member
Hi
My MF40 steering pump needs a new set of seals.
The pump is the remote reservoir type.
Do other pump seals fit, or are they specific to this pump, and has anyone got the seal kit numbers?
Has anyone a photo of the original remote reservoir and where it is mounted?

11023.jpg
[/img]

Best Regards
Burgs
 
That is a Plessey power steering pump, someone added that fitting, and hose probably just to make it easier to fill (which is not a bad idea).

Prior to tractor serial number 9A143879, Pump Kit 888744M93
After tractor serial number 9A143879, Pump Kit 888744M92
 
Thanks for that PT.
If the hose is just a remote way of filling it I will set up a bit better, currently it has a plastic reservoir hanging off the end of the hose.
Seals must be shot as oil leaks into the crankcase overnight.
Steering is working great otherwise.
Best Regards
Mark
 
(quoted from post at 19:32:31 02/19/18) Thanks for that PT.
If the hose is just a remote way of filling it I will set up a bit better, currently it has a plastic reservoir hanging off the end of the hose.
Seals must be shot as oil leaks into the crankcase overnight.
Steering is working great otherwise.
Best Regards
Mark


Yea, they probably did that so it could be run for awhile.
 
Looks like you need seal kit 1810529m91. Both the seal kits for each pump, subs up to this part number. Kit is still available from Agco.
Wayne
 
(quoted from post at 19:48:52 02/19/18) Looks like you need seal kit 1810529m91. Both the seal kits for each pump, subs up to this part number. Kit is still available from Agco.
Wayne



That's good they got it into one kit, probably all they did was include extra seals to make a "one kit seals either pump".
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top