Has Anyone Put A M330 Continental In To A 101 Massey

1206SWMO

Well-known Member
I was just wondering if a 226 Continental Massey bell housing will fit a M330
Continental engine?I'd like to put one in a 101 Massey Senior tractor.
 
I'm not able to answer your question:

I would send an e-mail to the below address and ask the question there:

?2013 by Zack Peterson and Podium Finish, LLC ? link_disallowed:

Then on the NET type in the below address:

Podium Newsletter 39 - Apr13 - Antique Tractor Pull Guide

You will find the below picture that supposedly has a M330 Cont. Engine
a244257.jpg
 
Nope, F226 or 244 uses a smaller housing than the M330, 363 engines. Might fit with some machine work. Why stop there? Find a B 427 from a Fox chopper, I started to do that to a 44 chassis I had, but sold the whole project. Still have a TD 427 turbo diesel military engine to stick in something some day. If I recall the B 427 is eight inches longer than the F 226. Ever seen Ervin Chew on his MH 203 LP gas puller, it's a 427 with Ford 429 heads on it he used to play with. Think you might mind some photos under Worlds fastest Massey..
 
Here are some numbers I gathered a few years ago when this question was asked

Block face/face
MH 44-6___F226____25in
MH203____Cont.M330___30 3/4
Cont.______B427____33 1/4
44-6 rear to pulley 28 1/2
Big shoehorn

Q.
 
The 101sr. has the same length frame as a 203. Use the 101 bellhousing and clutch. A couple of holes must be drilled in the plate on the bellhousing. The flywheel must be drilled to fit the 330 crankshaft.
Call me for at 765 524 2777 for any more information. Ervin
 
Guys,thanks for all the replies..As of right now I don't have a 101
for this project nor a M330 but I'm in the hunt for what I need....
The reason that I want to do this is because I once owned a 203 Massey
with the M-330 Continental....The engine was stuck and I never got
to hear it run before selling it to a collector in Michigan..

Ervin,I will give you a call when its time for this project to happen..
Below is a link for the perfect engine for me but its 1244 miles away..
M330 Continental
 
Give me a call I might have what your looking for Ervin is very knowledgable about this project your wanting to do 573-883-6449 Ste Genevieve Mo
 
Do you know where a guy could find a m330 or b427? I want to do a project but having trouble finding a motor.
 
I have a Continental m330 engine with about 500 hours on it. It was used as a fire pump at a military installation. It has dual ignition with 12 spark plugs, dual distributor and coils. Very cool old engine. It can be yours.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top