Rear main seal change on 4010

What is involved with changing the rear main seal on 4010 diesel? Is it an easy change? Putting new clutch in tractor, so it's already apart.
 
If it's an original seal you will need to remove the Quill to get the wiper off,, this is a wear ring that is on the crankshaft, I scribe it some and pop it off with an old screw driver, after you remove the wear ring clean the old gasket up good and put the quill back on ,use some sealant on both sides of the gasket and along the bottom where it meets the oil pan (this area can be a leak zone) then using the seal driver install the new seal.
a192001.jpg

a192002.jpg

a192003.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top