My 961 won't run right. There's something strange with the carb and I want to swap or replace it. I've put a rebuild kit on it, and they are not complicated carbs, but for some reason, it will starve for fuel.
I have a new petcock, new metal line, new screen in the sediment bowl, cleaned and blew out all the passages, but I think one of the small holes in the bottom casting is clogged and won't pass air or fuel.
It's a 172 cu/in or 2.8L engine found on the 800,900, and 4000 series row crop from 40-62HP rating. If you have a carb to sell, or loan so I can test it, let me know.
I can get it to run barely with my hand over the intake choking the engine a lot. Some reason, the fuel isn't being drawn up into and atomized at the venturi.
I have a new petcock, new metal line, new screen in the sediment bowl, cleaned and blew out all the passages, but I think one of the small holes in the bottom casting is clogged and won't pass air or fuel.
It's a 172 cu/in or 2.8L engine found on the 800,900, and 4000 series row crop from 40-62HP rating. If you have a carb to sell, or loan so I can test it, let me know.
I can get it to run barely with my hand over the intake choking the engine a lot. Some reason, the fuel isn't being drawn up into and atomized at the venturi.