I’ve been working on my BN the generator was rebuilt and since then I haven’t been able to get it to charge. The regulator is new and tested good as did the generator at the shop where they rebuilt it. I measured the voltage coming out of the generator and I only get 1.5 volts out of the field post and nothing out of the the armature post. I tried this with the regulator unhooked and same thing. I’ve cleaned my connections good. Everything worked fine before the generator was rebuilt it was just overcharging due to a bad regulator. So evything else is fine I’m leaning on there’s something going on in the generator what do you guys think? This is a 6 volt system