Changing to Narrow Front.

L.Fure · Dec 15, 2017

I am looking at the parts break down to see what is involved with changing my 300RN to narrow front. From what I can tell the steering gear has to be switch along with each type of front wheel arrangement. Is this accurate thinking? When I switch my 400 from wide front to narrow, after I had the adjustable wide front removed there was a place on the bottom on the steering gear box to bolt the narrow front pedestal to using four bolts. What I have in mind for my 300 looks more complicated.

Adirondack case guy · Dec 15, 2017

You need to unbolt the whole front bolster from the motor to change to NF. after you find a NF bolster. Not worth everything involved in my opinion.
Loren

L.Fure · Dec 15, 2017

(quoted from post at 18:20:48 12/15/17) You need to unbolt the whole front bolster from the motor to change to NF. after you find a NF bolster. Not worth everything involved in my opinion.
Loren

You're right, it is more trouble than it's worth.

Don L. · Dec 15, 2017

$350 . less hubs, with steering box, off a 311B, Austin Mn

Changing to Narrow Front.

L.Fure

Well-known Member

Adirondack case guy

Well-known Member

L.Fure

Well-known Member

Don L.

Well-known Member

Similar threads