D17 Series 1 starting "cough"

Luke470 · May 4, 2021

Hi all,

When trying to start my D17 it does the following. Was wondering what people thought.

Luke470 · May 4, 2021

Couldn't get the video attached.
Basically it cranks over a few times and then it's like it hits a dead spot.

old · May 4, 2021

As in cranks over then stops?? If that is happening pull the starter off and take a look at the ring gear it maybe missing some teeth

Luke470 · May 4, 2021

That is what it's doing.
Guessing to replace the ring gear a tractor split is in order?

old · May 4, 2021

Yes but I'd pull the starter off and have a look see before thinking about more work. Could also be the starter drive gear but not as likely as the ring gear

Luke470 · May 4, 2021

(quoted from post at 12:51:50 05/04/21) Yes but I'd pull the starter off and have a look see before thinking about more work. Could also be the starter drive gear but not as likely as the ring gear

Very many appreciate your help.

Luke470 · May 4, 2021

(quoted from post at 13:23:01 05/04/21)

(quoted from post at 12:51:50 05/04/21) Yes but I'd pull the starter off and have a look see before thinking about more work. Could also be the starter drive gear but not as likely as the ring gear

Click to expand...

Very many appreciate your help.

Very MUCH appreciate your help.

old · May 4, 2021

Always happy to help if and when I can

mdallisD17 · Jun 23, 2021

i dont know if this is still happening or helps, but my d 17 starter center bushing in the starter wore out and cocked the armature shaft
where the starter gear is, ultimately resulting in me snapping the shaft in half.

D17 Series 1 starting "cough"

Luke470

Member

Luke470

Member

old

Well-known Member

Luke470

Member

old

Well-known Member

Luke470

Member

Luke470

Member

old

Well-known Member

mdallisD17

Member

Similar threads