Allis chalmers plow identify please

(quoted from post at 14:48:58 03/01/21)

The Test Forum at the bottom of the Index page is a better place to try your picture posting until it works. Check the size of your pictures. If you pictures are too large it will block you as well. 7.5 MB is the size limit in a post, whether it is one picture or several together total that.

Below is the address to a post from over on the Unofficial Allis site's Knowledge Base Forum about AC plows. There may be some info there that will help you. If you have questions about plows you want to ask over there, please ask them on the Farm Equipment forum, not the Knowledge Base forum where you will see this info.

(Filters consider this site a competitor so I can't make a link to it. Copy and paste this address in your search engine after removing the *)

https://www.allis*chalmers.com/forum/ac-plows-parts-101_topic76502.html
 
mvphoto70934.jpg
 
It is an "80" series, specifically a model "83" because it is three-bottoms. Looks to be set up for 14 inch cut. That plow is on AGCO PARTS.com and there are several different BOTTOMS for that model of plow. Unless you can find a tag that tells what bottom number is on it (386--387--392 are the plow bottom number choices).
 
I think you'd do well to look at the pictures and figure it out. AGCOPARTSBOOKS.com....sign in as a Guest......type in moldboard plows 70 and 80 series plows is what you want to look at. Many, many pages of beams, frames, and plow bottoms.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top