Allis Chalmers Series II Factory Backhoe Steering Problem

Mike55

New User
I have an Allis Chalmers Series II Factory Backhoe. It has power steering. There is a small hydraulic ram for the steering and the coupler broke. I could probably manufacture a fix on my own but curious to see if I could find a replacement part.
cvphoto63984.png
 

cvphoto64467.jpg


cvphoto64468.png

So here ya go. Part I need for 1960s Allis Chalmers D-12 series II factory back hoe power steering. Allis chalmers part #70236179 (Cylinder Sleeve)
 

On the next page of the parts book; look at item key # 32, tube assembly. That is the part that is broken, I believe, from looking at your picture. I'm not sure of the condition of item key# 30 in your picture. Those are parts to the steering valve so if making a repair the length and movement of the parts inside the tube assembly must be maintained.

mvphoto65524.jpg


Have you checked with an Allis Dealer? You can ask them but I doubt the YT Store would have the parts you need. Sandy Lake Implement is one many have had good luck with on getting Allis Chalmers parts. There are a couple guys on the Unofficial Allis site that have some NOS parts they sell, you might check over there.

What general area of the world are you located in, someone might see this and know of some place in your area to check. There are the common salvage yards like Wengers, Worthington, etc.
 
32 is what I need. 30 and 31 appear to be intact. I'm located near Akron, Ohio. I will check the places you mentioned. If anyone has any ideas or help finding this please point
me in the right direction. Thanks Jim... Happy Thanksgiving.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top